Fiberglass Repair Boats miami

  • 1.00 Dollar US$
  • Published date: December 5, 2016
    • Hialeah, Miami, Florida, United States

Own a fiberglass boat long enough, and you’ll end up with a scratch, nick or gouge in the finish. It might be from a muffed landing, a dropped pair of fishing pliers or just a hole drilled in the wrong place. You can usually fix these yourself. It takes a bit of patience, but do it right and few will notice.
Complications occur when there’s damage on a textured surface like diamond nonskid or on a multitone finish. For these, call in a pro. Also, deep gouges may need structural fiberglass work or filler before you repair the gelcoat. On horizontal surfaces, liquid gelcoat works, but for vertical surfaces, a paste is easier to apply.

Tools and Supplies
*Masking tape
*Hand-held grinder and bits
*Countersink bit and drill motor
*Gelcoat resin and catalyst
*Coloring agents
*Mixing cups
*Stir sticks
*Latex gloves
*Dust mask
*Cleanup rags
*Putty knife
*Wet/dry sandpaper (320-, 600- and 1,000 grit)
*PVA curing agent
*Rubbing compound
*Boat wax

Useful information

  • Avoid scams by acting locally or paying with PayPal
  • Never pay with Western Union, Moneygram or other anonymous payment services
  • Don't buy or sell outside of your country. Don't accept cashier cheques from outside your country
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"